Description
This is a high quality water/meth injection pump designed to work with Stainless Steel lines. It can achieve the smallest micron droplet size possible. Complete with an internal bypass design that creates a superior flow at higher pressure than pumps that utilize an external cutoff switch. The pump runs at 300 PSI and should run for a very long time.
Water-methanol used to be only for those extremely high-tuned engines, but with the advancements in technology it is now a good idea to install it on nearly any vehicle. This kit includes everything required to bolt onto the vehicle including:
Water-meth injection is designed to suppress detonation caused by high temperature and pressure that develops in the combustion chamber. The kit essentially aids in reducing the power lost during detonation. Some of the benefits include:
An increase of horsepower (typical results are 10-15% in boosted and properly tuned engines)
Lower EGTS (typically between 50-200 degrees)
Increased octane rating while under boost
Reduces cylinder temperatures
Reduced fuel deposits
Unlike many other power modifications that place more strain on the engine, water-meth kits actually reduce the strain on the engine, while allowing for an increase in power. We recommend these to anyone looking at increasing fuel mileage, increasing power, or wanting to maintain their engine for an extended period.
These are designed to run with a 50/50 distilled water/methanol composite. They will also run just fine on straight distilled water. Though the power results will not be the same the decreased EGTs and cleaning properties will still be maintained.
Many people use their existing windshield washer fluid reservoir to store the water/meth mix. This tank provides an alternative option.
Feel free to contact us with any questions.
