Description
Limited supply! Group 31 dual terminal deep cycle battery. Tested to 100% capacity customer will turn in their core, otherwise cost is +$30. Sold as unbranded 2nd. These batteries cost $350-$450, each, from other sources.
**FAQ**
-Brand – Sold as 2nds, made by East Penn. There are only 3 manufacturers of batteries in the world – East Penn, Johnson Controls and Stryten. They put the sticker of whomever you buy it from on there, be it Bosch, Deka, Costco, VW, BMW, Varta, or whatever.
-Why are these better? – Budget batteries from Walmart, Napa and others are 931MF (value), 1031MF is the premium line, 1131MF is the same as the Deka Gold line, 1231MF series are the premium line, 7T31 and DP31 are the dual purpose (lower CCAs. higher reserve) platinum severe service, and 9 series are AGM. The best of all is the 9F (Fahrenheit) edition.
-Why are they 2nds? – because of either due to excess stock, a blemish on the casing, or often because the manufacturer, East Penn, is not allowed to charge the batteries after they are made. Because of this they have a short shelf life at the point of manufacture. Our distributor picks them up when they reach the end of the short storage life and immediately tops them off. This allows you to have a fresh battery for a big discount off normal retail cost!
-If they are 2nds are they used? – No, there is nothing wrong with them. They test above rated capacity and have never been installed on a vehicle.
-Will you ship them? – No, we will not ship these, local pickup only.
-Are there discounts for bulk purchases? – Generally no. If you want more than 10 batteries we can talk. These have a very small markup, our profit is turning in your core. Which leads us to:
-Do I have to turn in a core? – Yes, that’s where our profit is on these. If you do not have a core the cost is $30 more.
-Warranties – We’re often asked about warranties – these batteries are sometimes half the cost of Costco and just as good. If we charged you twice as much we could offer a warranty, but because we show you it’s at 100% capacity we cannot offer warranties at this price point. If there is an issue right off the bat we’ll take care of you, but if months down the road your alternator fails, or you leave the lights on and it wipes out your battery we can’t warranty it out.
-Payment – Cash, Card, Venmo, Cash app or Apple Pay. Cash and card are easiest. If you order this and choose local pickup it will reserve you your battery and you can come in and pick it up.
-Do you have it in stock? – This listing has our current stock, if it shows in stock it should be in stock.
Where are you at?
Cascade German Parts on the corner of 8th and Cleveland with 3 big shipping containers in the lot, **Bring your core or tools to change out your battery in our parking lot**
710 NE Cleveland Ave Ste 150
Gresham 97030
M-F 8-5
**If you call us you can leave a voicemail and we’ll call you back, but we designed this listing to answer all questions so that you can just drop by and pick it up.**
Not available to ship, local pick-up in Gresham Oregon only.
——-
PERFORMANCE:
Part number DP31DT
BCI Group 31
Terminal Type – dual post
CCA 700
DIMENSIONS:
Lenght: 12.99in
Width: 6.73in
Height: 9.49in
Weight: 57lb
Marine Terminal on top with Positive on LEFT
• Increased grid frame tensile strength, resists plate growth to safeguard against life-threating shorts.
• Thicker back web and puncture resistant separators prevent plate-to-plate electrical shorts
• Ultra-Pure Electrolyte with no impurities inhibits unnecessary water loss.
• Full-frame plate vs. expanded metal grid prevent exposed wire electrical shorts
• Advanced battery formation controls prevent high temperature damage and under-formed plates.
• EAST PENN POWER–PERFORM PLATES , WHEN COMPARED TO LEADING COMPETITORS HAVE
13% LESS POSITIVE PLATE FAILURES.
• LAST 24% LONGER IN HIGH HEAT AND SEVERE SERVICE APPLICATIONS
• HAVE 25% LESS PREMATURE FAILURES THAN THE LEADING COMPETITORS
East Penn’s Advanced-Cubed (A3) Technology utilizes internal components made with the finest life extending and power producing materials.
These materials, such as the purest electrolyte and specially formulated oxide, are the same used in batteries for critical stationary
applications with an extended design life. High-end components are precision crafted into the battery to achieve maximum
durability. This process utilizes the most modern equipment to ensure that this is done in the most efficient way.
