Description
OE specification VW .681 ratio 5th gear set. A solid upgrade over the typical .756 TDI 5th gear. Built to factory specs and treated to factory hardness specs. Typical drop over a stock TDI is approximately 350 rpm. This is a very popular upgrade and is usually the best available option for those driving an average 55-65 MPH while commuting.
It is recommended that the gear oil and transmission seal be changed when a 5th gear is replaced.
Fits the Following:
1990+ 02A- & 02J-Based Transmissions
——————-
DIY instructions on pulling gears.
Note on Installation: Be sure to heat the gear to 100ºC when both removing as well as re-installing the gear or you risk damaging it. It is a good idea to use blue Loctite® on the small gear pinion shaft.
Note for BEW Engine Code: Vehicles with a BEW engine code will lose Cruise Control functionality unless this modification is also paired with a tune that accounts for it.
Note: This will fit various other non-U.S. market vehicles (Audi, Skoda, etc.). If you have any questions please contact us.
There are no reviews yet.